德控DELCON工業火花塞用于發電站的燃?xì)獍l(fā)電機組。選擇德控DELCON工業火花塞替代進口，終端用戶可節省的相當可觀的維護費用，經銷商可以獲得許多新的客戶和銷售機會。

    無論是應用在污水處理、垃圾填埋和醫院等公用事業，還是小區供熱，都需要工業火花塞來點燃天然氣或者污水處理氣、發酵沼氣、垃圾填埋氣、煤層瓦斯氣，從而實現供電、供熱和供熱水。

    德控DELCON工業火花塞分為兩種，一種為大型的透平渦輪發動機配套，一種為中小型6至20缸活塞式燃?xì)獍l(fā)動機配套。發電機組的特征是在停機維護前，不允許故障停機，這**要求火花塞無論是在設計、制造還是原材料方面具有非常好的可靠性。德控DELCON工業火花塞在這些方面的優勢，吸引了國內外大批使用通用電氣GE、卡特皮勒CAT、道依茨DEUTZ、顏巴赫J(rèn)ENBACHER、高斯科爾GUASCOR等工業發電機的**客戶。 

DELCON Heavy Duty – special spark plug for stationary gas operated industrial engines. When you choose the DELCON Heavy Duty range of products, end users can save lots of maintenance cost and distributors can open up whole new group of customers and ensure additional sales possibilities.
 Whether they are used in communal installations (for example purification plants, landfills or hospitals) or as more recently in district heating facilities for residential houses – everywhere that natural gas or waste products such as sewer gas, fermentation gas,  landfill gasses and coal mine gas are burned using district heating central plants, industrial spark plugs are in use and play their part in reclaiming current, hot water and heat.
 

There are 2 types of heavy Duty spark plugs. DELCON plugs serve for Turbine Generators with high power output, also serve for engines with 6 to 20 cylinders .To master the non-stop operation that is most in demand, which is only interrupted for maintenance tasks, and at the same time to stand up to the extremely long intervals between replacements, DELCON Heavy Duty industrial spark plugs are manufactured of high quality materials that are extremely resistant to combustion. This attracts lots of  customers who are using generators by GE, JENBACHER, CATERPILLAR, DEUTZ, GUASCOR etc.

火花塞拆裝注意事項
·拔下高壓線接頭時應輕柔，操作時不可用力搖晃火花塞絕緣體，否則會破壞火花塞密封性能。
·發動機冷卻后方可拆卸，當旋松所要拆卸的火花塞后，用一根細軟管逐一吹凈火花塞周圍的污物，以防火花塞旋出后污物落入燃燒室內。
·螺絲周圍、火花塞電極和密封墊必須保持清潔，干燥無油污，否則會引發漏電、漏氣、火花減弱等故障。
·安裝時，先用套筒將火花塞對準螺孔，用手輕輕擰入，擰到約螺紋全長的1/2后，再用加力杠桿緊固。若擰動時手感不暢，應退出檢查是否對正螺口或螺紋中有無夾帶雜質，切不可盲目加力緊固，以免損傷螺孔，殃及缸蓋，特別是鋁合金缸蓋。
·應按要求力矩?cái)Q緊，過松會造成漏氣，過緊使密封墊失去彈性，同樣會造成漏氣。錐座型火花塞由于不用密封墊，遵守?cái)Q緊力矩尤顯重要。

工業火花塞：

道依茨、MWM機組火花塞

S-R6A15

S-R6A16

S-R6A12


CAT、瓦克夏、高斯卡爾等機組火花塞：

R5B12-77

R6GC1-77

顏巴赫機組火花塞：

R10P3

R10P7

R9B12-77



產品包裝：

工業火花塞